Skip to main content
Loading…
This section is included in your selections.

In addition to the design standards of Chapter 19.35 LMC, the following are applicable to all short subdivisions:

A. Lots.

1. All lots shall provide for the minimum depth, width, width at the building line and area as required by the zoning code, LMC Title 21.

2. The development and business services director shall designate the yard designations for lots within short plats to ensure that the location of buildings will be compatible to the existing development in the area. In determining setbacks, under no circumstance shall a house be allowed to be constructed within five feet of a private road whether held in a separate tract or access easement, as required by the zoning code for an interior lot in a single-family residential zone. The determined setbacks shall be indicated on the final short plat map.

B. Utilities.

1. All utility improvements shall be prepared and certified by a licensed professional engineer, registered in the state of Washington.

2. All utility improvements shall be designed in conformance with the standards of the public works department. (Ord. 3399 § 2 (Exh. A), 2021; Ord. 3311 § 7, 2018; Ord. 3158 § 5, 2015; Ord. 2671 § 1, 2007; Ord. 2463 § 12, 2003; Ord. 1314 § 12, 1983)