A. Design Guidelines for Multiple-Family Uses. Construction of any multiple-family structure or building including duplexes (two-family dwellings) permitted outright or by conditional use permit in any residential zone shall comply with Lynnwood Citywide Design Guidelines for All Districts and Multi-family Districts, as adopted by reference in LMC 21.25.145(B)(3), and receive approval pursuant to Chapter 21.25 LMC, unless otherwise specified in this chapter.

B. Design Guidelines for Nonresidential Uses. Construction of any nonresidential structure or building with a gross floor area of more than 1,000 square feet, permitted outright or by conditional use permit in any residential zone shall comply with Lynnwood Citywide Design Guidelines for All Districts and Multi-family Districts, as adopted by reference in LMC 21.25.145(B)(3), and receive approval pursuant to Chapter 21.25 LMC, unless otherwise specified in this chapter.

C. Design Guidelines for Parking Lots and Parking Structures. Construction of any parking lot and/or parking structure with 20 or more stalls or paved parking area of 5,400 square feet or more permitted outright or by conditional use permit in any residential zone shall comply with Lynnwood Citywide Design Guidelines for All Districts and Commercial Districts, as adopted by reference in LMC 21.25.145(B)(3), and receive approval pursuant to Chapter 21.25 LMC, unless otherwise specified in this chapter.

D. Supersede. Applicable Lynnwood Citywide Design Guidelines, as adopted by reference in LMC 21.25.145(B)(3), shall supersede any development standards and requirements of this chapter that may conflict, unless otherwise specified in this chapter.

E. Gateways and Prominent Intersections. See city of Lynnwood zoning map to identify development project sites within a gateway or prominent intersection location. Such sites shall be subject to applicable gateway and/or prominent intersection design guidelines identified in the All Districts section of the Lynnwood Citywide Design Guidelines, as adopted by reference in LMC 21.25.145(B)(3). If any portion of a project site lies within a gateway or prominent intersection location, then the entire project shall comply with the applicable design guidelines. (Ord. 2466 § 2, 2003)