21.50.210 Additional development standards.
A. Building Height.
1. BTP Zone. For buildings taller than three stories, the floor area to lot area ratio (FAR) shall not exceed 0.4, unless specifically allowed by conditional use permit approval. In connection with any such conditional use permit approval, the applicant shall demonstrate that the additional floor area will not adversely impact traffic flow and volumes on the public streets, as compared to other existing or anticipated developments on other properties in the same zone and vicinity.
2. LI Zone. The development and business services director may authorize an increase in maximum building height not to exceed eight feet in height from the floor of the roof when the applicant demonstrates conformance with the general intent of the chapter.
B. Setbacks for Fences. Fences, walls and hedges up to six feet in height may be located in any portion of an industrial-zoned lot as long as the fence is not located within intersection and driveway sight distance triangles, does not obstruct driver and pedestrian visibility, and complies with applicable Lynnwood Citywide Design Guidelines, as adopted by reference in LMC 21.25.145(B)(3).
C. Parking Requirements.
1. Required Number of Stalls. Requirements for parking are provided in Chapter 21.18 LMC.
D. Surface Water Management. Each industrial area shall have adequate facilities for management of surface water. (Ord. 3415 § 53, 2022; Ord. 3399 § 2 (Exh. A), 2021; Ord. 3326 § 15, 2019; Ord. 3265 § 5, 2017; Ord. 3140 § 9, 2015; Ord. 2441 § 16, 2003; Ord. 2388 § 47, 2001; Ord. 2020 § 21, 1994; Ord. 1630 § 7, 1988; Ord. 1465 § 3, 1985; Ord. 1461 § 3, 1985; Ord. 1424 § 3, 1984; Ord. 1343 § 5, 1983; Ord. 1052 §§ 1, 2, 1979; Ord. 1036 § 2, 1979; Ord. 888 § 4, 1976; Ord. 638 § 1, 1972; Ord. 575 § 1, 1970; Ord. 407 § 2, 1968)